Brickform Dry Integral Color

The colors on this color chart are approximate, using laboratory samples of troweled concrete made from a 6-sack mix, using Type II Gray Portland Cement, Silica Sand, and water with a 4 inch slump. Disclaimer: This digital color card should be used as a general guide, not a definitive indicator of final color. Shades and hues can vary depending on screen settings. When planning a project, consult a physical color card for a better indication of potential color. Create a representative mockup before any project to better account for the effects of conditions, material, and techniques that may alter the final appearance or color.

  •  
    Earthen1 bag per 2 cy (for dry)
  •  
    Rawhide1 bag of Earthen per cy (for dry)
  •  
    Buckskin2 bags of Earthen per cy (for dry)
  •  
    Leather3 bags of Earthen per cy (for dry)
  • Slate1 bag per 2 cy (for dry)
  •  
    Light Gray1 bag of Slate per cy (for dry)
  •  
    Shale2 bags of Slate per cy (for dry)
  •  
    Storm Gray3 bags of Slate per cy (for dry)
  •  
    Mauve1 bag per 2 cy (for dry)
  •  
    Guava1 bag Mauve per cy (for dry)
  •  
    Claret2 bags of Mauve per cy (for dry)
  •  
    Cayenne3 bags of Mauve per cy (for dry)
  •  
    Buff1 bag per 2 cy (for dry)
  •  
    Chamois1 bag Buff per cy (for dry)
  •  
    Harvest Gold2 bags of Buff per cy (for dry)
  •  
    Goldenrod3 bags of Buff per cy (for dry)
  •  
    Sand1 bag per 2 cy (for dry)
  •  
    Desert Sand1 bag of Sand per cy (for dry)
  •  
    Pine Cone2 bags of Sand per cy (for dry)
  •  
    Moroccan Tan3 bags of Sand per cy (for dry)
  •  
    Tan1 bag per cy (for dry)
  •  
    Sienna2 bags of Tan per cy (for dry)
  •  
    Salmon3 bags of Tan per cy (for dry)
  •  
    Dill1 bag per cy (for dry)
  •  
    Houseplant Green2 bags of Dill per cy (for dry)