Brickform > Resurfacing Products > Stampable Overlay SC-60 (White Mix)

Stampable Overlay SC-60 (White Mix)

Product ID: SC

Product Details

Where to Buy

BRICKFORM Stampable Overlay SC-60 (White Mix) 

BRICKFORM Stampable Overlay (SC-60) is a white cement, premixed blend of special materials that, when mixed with water, forms a thin, stampable concrete coating. SC60 Stampable overlay can be integrally colored using BRICKFORM Overlay Liquid Colorants and topically colored with a wide range of BRICKFORM coloring products. BRICKFORM Stampable Overlay is easy to install and forms a tough, durable topping that will withstand years of wear. When used on properly prepared surfaces, BRICKFORM Stampable Overlay will permanently bond to concrete surfaces.
  • Interior/Exterior Use
  • Creates A New 1/4”-1/2” Surface
  • Can Be Textured & Colored
  • Durable
  • Can be integrally colored with BRICKFORM Overlay Liquid Colorant

View coverage rates on the TIS to estimate the product needed for your project.

Use Where to Buy to find a BRICKFORM distributor.

Information
for Homeowners

Information for Homeowners

Brickform Stampable Overlay forms a thicker (0.25” to 0.5” thick) cementitious top layer over existing concrete. With proper surface preparation and the use of Triple Seven Bond Coat primer, Stampable Overlay permanently bonds with the existing slab.  The durable top layer created by Stampable Overlay makes is possible to smooth previously textured concrete, stamp and texture plain concrete, create a fresh, new texture, or otherwise restore and upgrade the surface. Stampable Overlay can be colored, textured, dyed, and stained just like any other surface. Add texture and color to your driveway, sidewalk, patio, pool deck, and stairs.

Brickform textures compatible with Stampable Overlay are denoted by the S/O designation at the end of the model number.

Use our Where to Buy feature to find a Brickform distributor near you. Our distributors can direct you to a qualified contractor in your area.

Information
for Architects

Information for Architects

Brickform Stampable Overlay is ideal for upgrading an older surface. When an existing concrete surface is showing age and is in need of resurfacing, Brickform Stampable Overlay can be applied to create a tough, durable top layer that will withstand years of wear. This new surface allows for texture to be imparted using texture skins and stamps. When used with Brickform Triple Seven Bond Coat, Stampable Overlay permanently bonds with the existing surface.

  • Creates a new ¼” to ½” Surface

  • Can be Textured & Colored

  • Durable

  • Use with Triple Seven Bond Coat

 

Information
for Contractors

Information for Contractors

Brickform Stampable Overlay is ideal for upgrading an older surface. When an existing concrete surface is showing age and is in need of resurfacing, Brickform Stampable Overlay can be applied to create a tough, durable top layer that will withstand years of wear. This new surface allows for texture to be imparted using texture skins and stamps. When used with Brickform Triple Seven Bond Coat, Stampable Overlay permanently bonds with the existing surface.

  • Creates a new ¼” to ½” Surface

  • Can be Textured & Colored

  • Durable

  • Use with Triple Seven Bond Coat

View coverage rates on the TIS to estimate the product needed for your project.

Use Where to Buy to find a BRICKFORM distributor.

Project Photos
50x39

Indoor Stampable Overlay

Indoor Stampable Overlay

BRICKFORM OL-60 Stampable Overlay, stamped with BRICKFORM Smooth Slate Texture Skin was used throughout the main floor of this home stamped with . The contractor used Blush Tone Acid Stain to color the Stampable Overlay.

Products Used in this Project

50x39

Pool with Accent Lighting

Pool with Accent Lighting

Winner of the 2013 Iowa Ready Mixed Concrete Association Excellence in Residential Decorative Concrete award, this project makes extensive use of Solomon integral color, and Brickform/Legacy textures and resurfacing products. The pool deck and wall caps were colored using Solomon 600 White integral color. Brickform Roman Slate texture skins were used with liquid release to texture the pool deck and porches. Legacy Artisan Overlay (equivalent to Brickform Stampable Overlay) was used to overlay the porches. Legacy Espray (Brickform SM Professional) was sprayed on the planters and exposed portions of the foundation. Both overlays were colored using Legacy 101 Bone.

Products Used in this Project

50x39

Spray Texture Random Stone with Solid Border

Spray Texture Random Stone with Solid Border

SM Professional Grade can be sprayed on to give a stippled, slip resistant texture. In this project, a white base coat would have been applied to the surface and sides of the steps and porch to create the white grout lines, followed by a layer of charcoal for the sides, and bluestone for the tops. Highlights of white and charcoal were sprayed on last. This project used Legacy Liquid Overlay Colorant.

Products Used in this Project

50x39

W.L. Tucker Supply

W.L. Tucker Supply

This Brickform distributor in Akron, Ohio updated their shop using Brickform Stampable Overlay and SM Professional. The wood-grain surface is Stampable Overlay with the Classic Wood texture. The color effects can be achieved using Brickform Liquid Overlay Colorant, Color Hardener, or your choice of Stain for the base color. The highlight color can be created using Antique-It, Antique Release, or your choice of Stain. The tile pattern is SM Professional, colored with Liquid Overlay Colorant. The highlighting and foreground color can be created using your choice of Stain.

Products Used in this Project

Literature

Product Literature


(M)SDS

Catalog

CSI 3 Part specs

TIS

Color Cards