Tips, tricks and product updates:
Get the Brickform newsletter!
BRICKFORM’s premium sealers bring out the natural beauty of the textures and colors unique to a decorative surface. These superior, durable sealers also protect the finish from sun damage, yellowing, scuffing and premature wear.
Acrylic sealers form a film on the surface of the concrete that protects against common stains and dirt, repels water and enhances appearance. They come in solvent-based formulations.
For a durable, high-gloss, wet-look concrete sealer, choose Gem-Seal.
Poly-Seal is a durable, glossy sealer that uses high quality acrylics to protect concrete against staining, mildew, and dusting.
Designed to be slip-resistant and is ideal for around pool decks and areas where water or moisture can accumulate.
These sealers can be applied immediately after final finish and all surface water has completely evaporated. Cure and seals minimize moisture loss from evaporation in newly placed concrete to provide maximum strength, hardness and protection.
Performance sealers or coatings, such as polyurethanes, polyaspartics and epoxies are often the best choice for interior concrete flooring.
UreMax is a two-part, matte finish polyurethane coating.
DecoPoxy is a water-based, low VOC epoxy coating formulated to protect interior concrete floors while enhancing color.
Poly-Astic is a two-part, high-build, very high solids coating that does not yellow.
Enhance your sealer with the following additives:
Use these related products along with Brickform sealers:
* Not a preferred method but possible with proper personal protection.
** Brickform Refresh is not intended for use in the South Coast and Bay Area Air Quality Management Districts of California or areas where Dimethyl Carbonate is not an exempt solvent.
Swissmex Sprayers are available for acetones, solvents or acids, and in hand, pump up or backpack styles.
The best sealant to use on concrete will depend on the surface being sealed. Look for a high-quality sealer that provides excellent protection against water, UV rays, and stains while enhancing the appearance of the concrete surface.
Traditionally, concrete is sealed when it has fully cured, which typically takes 28 days. However, if you want to seal right after pouring, you can apply a cure and seal product once the bleed water has disappeared. Refer to the specific TIS for the sealer you choose to get timing recommendations. Always seal when the weather conditions are dry and the concrete surface is clean. You may need to reseal every few years to keep your concrete looking its best.
The best outdoor concrete sealer offers excellent protection against harsh weather conditions, UV rays, water damage, and stains. It may also enhance the color and appearance of the concrete. You can choose from film-forming, or penetrating formulations.
The time it takes to seal concrete varies based on the size of the area being sealed, the type of sealer used, environmental conditions and the amount of prep work required. In general, sealing concrete can take a few hours to a full day. For a better idea of how long the process will take, refer to the TIS of the specific sealer you are using.
If you prefer a wet look, the best concrete sealer for a driveway is Brickform Gem-Seal. If you prefer a natural appearance, Stealth-Seal WB is the way to go. Both sealers provide excellent protection and enhance the durability of your driveway.
For sealing concrete basement floors, high-performance sealers or coatings such as polyurethanes, polyaspartics, and epoxies are best. Brickform UreMax is great if you want a matte finish. But if you want a high gloss finish with color enhancement either DecoPoxy or Poly-Astic will do the trick.
Picking the best concrete sealer for your project depends on your specific application, desired appearance, and environmental preferences. Brickform manufactures a wide range of premium sealers with exceptional durability. Our technical representatives can assist you in determining which option is best for your project.
Water-based acrylic sealers and penetrating sealers with low or no VOC content are recommended for those seeking eco-friendly alternatives with minimal impact on the environment. Consider Gem Cure & Seal WB and Stealth-Seal WB for outdoor concrete or DecoPoxy for indoor floors.
While you can buy concrete sealers at local home improvement stores, they may not be the best quality. Brickform’s premium sealers are available through a network of distributors throughout North America. Head over to the Brickform map and find a distributor near you.
We have a nationwide network of stocking distributors who are ready to serve you.
Brickform was founded in 1971 during the early days of modern decorative concrete. With innovations such as urethane stamps and computer aided design, Brickform has long been at the forefront of the industry.
© 2024 Brickform, a division of Solomon Colors, Inc. All Rights Reserved. Privacy Policy
